Sales of Bergers thermal materials Sil-Pad 400

PRODUCT DESCRIPTION：

The Original Sil-Pad® Material

FEATURES AND BENEFITS:

Thermal impedance: 1.13°C-in2/W (@50 psi)

Original Sil-Pad material

Excellent mechanical and physical characteristics

Flame retardant

TYPICAL PROERTIES OF SIL-PAD 400:

Color: Gray

Reinforcement Carrier: Fiberglass

Thickness (inch) / (mm):7mil/9mil/11mil（0.178mm/0.229mm/0.279mm）

Hardness (Shore A):85

Elongation (% at 45º to Warp and Fill):54

Continuous Use Temp (°F) / (°C):-60℃~180℃

Dielectric Breakdown Voltage (Vac)：3500/4500

Dielectric Constant (1000 Hz)：5.5

Volume Resistivity (Ohm-meter)：10¹¹

Flame Rating：V-O

Thermal Conductivity (W/m-K)：0.9

Material advantages:

Sil-Pad® 400 is a composite of silicone rubber and fiberglass. The material is flame retardant and is specially formulated for use as a thermally conductive insulator. The primary use for Sil-Pad® 400 is to electrically isolate power sources from heat sinks.

Sil-Pad® 400 has excellent mechanical and physical characteristics. Surfaces are pliable and allow complete surface contact with excellent heat dissipation.

Sil-Pad® 400 actually improves its thermal resistance with age. The reinforcing fiberglass provides excellent cut-through resistance. In addition, Sil-Pad® 400 is non-toxic and resists damage from cleaning agents.

TYPICAL APPLICATIONS INCLUDE

Power supplies

Automotive electronics

Power semiconductors

Motor controls

CONFIGURATIONS AVAILABLE

Sheet form, die-cut parts and roll form; with or without pressure sensitive adhesive